Tool caddy tool bag in black and orange used for working at height.
Tool caddy tool bag in black and orange used for working at height.
Tool caddy tool bag in black and orange used for working at height.
Tool caddy tool bag in black and orange used for working at height.

Tool Caddy

SKU: TB-CAD-D
WLL: 25 kg

£0.00

The Tool Caddy is a familiar general purpose tool bag used in many industries. However, this version has been highly optimised for people who use tools at height.

SKU Size Quantity
TB-CAD-D Single
SKU: TB-CAD-D Categories: ,

The Tool Caddy is a familiar general purpose tool bag used in many industries. However, this version has been highly optimised for people who use tools at height. The Caddy is extremely stable with a convenient handle arrangement that makes it easy to carry and place on the ground. It can also be hoisted and suspended via 2 structural D-rings. The top of the bag is reinforced in such a way that it holds its shape and does not collapse in on itself whilst being suspended.

• 4 x Large external pocket
• Lifting/Anchorage D-Rings
• 8 x D-ring tethering points

Volume: 18L / Height: 50cm / Width: 24cm / Depth: 24cm / Weight: 1.3Kg

WLL 25kg

All-in-one safety.

All Leading Edge tool tethering products are tested and certified in accordance with EN364-1992 test methodology. It conforms to the provision and scope of our testing and quality procedures as per the PPE Regulations (EU)2016/045, where applicable and relevant within the fit for purpose design parameters.

Safety Factors.

All certified Leading Edge products boast a whopping 47x safety factor. We purposefully over engineer our products to have greater resilience than a real world scenario would require — this gives them superior in-service lifespan and fully 3guarantees your safety in daily use.

Testing Methods.

All tool safety equipment classified as UKCA approved must surpass two rigorous testing methods.

Static Test.

We attach the product to an anchor point and apply pressure by hanging a weight from it. A product only passes if it is able to withstand the load for a minimum of three minutes without signs of damage or weakening.

Dynamic Drop Test.

We attach the product to an anchor point and apply pressure by hanging a weight from it. A product only passes if it is able to withstand the load for a minimum of three minutes without signs of damage or weakening.

Every item that leaves our factory comes with full documentation containing technical specifications, serial numbers, testing methods, working load limits and inspection results proving it has passed all necessary requirements for work at height.