Leading Edge Pro Wire Lanyard
Hammer tool tethering lanyard

Pro Wire Lanyard

SKU: TL-PW-LS
WLL: 20 kg

£0.00

The Pro Wire Lanyard is our toughest extreme tool lanyard. It is specifically engineered for use in the harshest environments where it may be exposed to heat or moisture on a daily basis.

SKU Size Quantity
TL-PW-LS-1 1m
TL-PW-LS-2 2m
TL-PW-LS-3 3m
SKU: TL-PW-LS Categories: ,

The Pro Wire Lanyard is our toughest extreme tool lanyard. It is specifically engineered for use in the harshest environments where it may be exposed to heat or moisture on a daily basis. Strong stainless steel cable, large swages, thimble eyes and a reinforced clear resin jacket provides crush and impact resistance. Provides extra length to tether larger tools requiring a fixed anchorage.

• 3mm stainless steel wire
• Reinforced resin sleeve
• Swivel prevents lanyard twisting

You may also be interested in our Wire Lanyard.

WLL 20kg

All-in-one safety.

All Leading Edge tool tethering products are tested and certified in accordance with EN364-1992 test methodology. It conforms to the provision and scope of our testing and quality procedures as per the PPE Regulations (EU)2016/045, where applicable and relevant within the fit for purpose design parameters.

Safety Factors.

All certified Leading Edge products boast a whopping 47x safety factor. We purposefully over engineer our products to have greater resilience than a real world scenario would require — this gives them superior in-service lifespan and fully 3guarantees your safety in daily use.

Testing Methods.

All tool safety equipment classified as UKCA approved must surpass two rigorous testing methods.

Static Test.

We attach the product to an anchor point and apply pressure by hanging a weight from it. A product only passes if it is able to withstand the load for a minimum of three minutes without signs of damage or weakening.

Dynamic Drop Test.

We attach the product to an anchor point and apply pressure by hanging a weight from it. A product only passes if it is able to withstand the load for a minimum of three minutes without signs of damage or weakening.

Every item that leaves our factory comes with full documentation containing technical specifications, serial numbers, testing methods, working load limits and inspection results proving it has passed all necessary requirements for work at height.