Work Safety Tool Lanyards - mini spiral lanyard in orange
Tool tethering lanyard

Mini Spiral Lanyard

SKU: TL-SPIR-CKS
WLL: 1.5 kg

£0.00

The Mini Spiral Lanyard is suited for small hand tools. It provides the same reach and functionality of a standard lanyard but is much lighter and less bulky.

SKU Size Quantity
TL-SPIR-CKS 50cm
SKU: TL-SPIR-CKS Categories: ,

The Mini Spiral Tool Lanyard is suited for small hand tools. It provides the same reach and functionality as a standard lanyard but is much lighter and less bulky. Being synthetic means it is also better for external applications. The slender coiled design prevents snagging/tripping hazards and dampens the impact force of a dropped tool.

• 50cm (1.5m stretched)
• Captive Screw-Gate Karabiners and Swivel
• 2mm stainless steel inner core
• 5mm synthetic outer sleeve
• Lightweight and flexible

You can also view our Spiral Lanyard.

WLL 1.5kg

All-in-one safety.

All Leading Edge tool tethering products are tested and certified in accordance with EN364-1992 test methodology. It conforms to the provision and scope of our testing and quality procedures as per the PPE Regulations (EU)2016/045, where applicable and relevant within the fit for purpose design parameters.

Safety Factors.

All certified Leading Edge products boast a whopping 47x safety factor. We purposefully over engineer our products to have greater resilience than a real world scenario would require — this gives them superior in-service lifespan and fully 3guarantees your safety in daily use.

Testing Methods.

All tool safety equipment classified as UKCA approved must surpass two rigorous testing methods.

Static Test.

We attach the product to an anchor point and apply pressure by hanging a weight from it. A product only passes if it is able to withstand the load for a minimum of three minutes without signs of damage or weakening.

Dynamic Drop Test.

We attach the product to an anchor point and apply pressure by hanging a weight from it. A product only passes if it is able to withstand the load for a minimum of three minutes without signs of damage or weakening.

Every item that leaves our factory comes with full documentation containing technical specifications, serial numbers, testing methods, working load limits and inspection results proving it has passed all necessary requirements for work at height.