Large black bag to carry tools at height - pig bucket
Pig Bucket tool bag in black for working safely at height
Pig Bucket tool bag in black with handle for working safely at height
Pig Bucket tool bag in black for working safely at height
Pig Bucket tool bag in black for working safely at height

Big Pig Bucket

SKU: TB-BPIG
WLL: 25 kg

£0.00

The Big Pig Bucket gives you a greater capacity to take more tools and materials at height.

SKU Type Quantity
TB-BPIG-D Standard
TB-BPIG-D-CS Drawstring Closure
SKU: TB-BPIG Categories: ,

The Big Pig Bucket gives you a greater capacity to take more tools and materials at height. It is useful for situations where you have lots of items, as it is more convenient to put everything in one bucket and hoist it into a suitably elevated work position. You can then work directly from the bucket. An optional drawstring closure system protects your contents from bad weather and spillage.

• Lifting/Carry strap
• Greater capacity
• Reinforced opening
• 10 x D-ring tethering points

Volume: 29L / Height: 42cm / Diameter: Ø 30cm / Weight: 1.1Kg
WLL 25kg

All-in-one safety.

All Leading Edge tool tethering products are tested and certified in accordance with EN364-1992 test methodology. It conforms to the provision and scope of our testing and quality procedures as per the PPE Regulations (EU)2016/045, where applicable and relevant within the fit for purpose design parameters.

Safety Factors.

All certified Leading Edge products boast a whopping 47x safety factor. We purposefully over engineer our products to have greater resilience than a real world scenario would require — this gives them superior in-service lifespan and fully 3guarantees your safety in daily use.

Testing Methods.

All tool safety equipment classified as UKCA approved must surpass two rigorous testing methods.

Static Test.

We attach the product to an anchor point and apply pressure by hanging a weight from it. A product only passes if it is able to withstand the load for a minimum of three minutes without signs of damage or weakening.

Dynamic Drop Test.

We attach the product to an anchor point and apply pressure by hanging a weight from it. A product only passes if it is able to withstand the load for a minimum of three minutes without signs of damage or weakening.

Every item that leaves our factory comes with full documentation containing technical specifications, serial numbers, testing methods, working load limits and inspection results proving it has passed all necessary requirements for work at height.