Battery Drill Holster in black and orange with tether point to protect power drill at height
Battery Drill Holster in black and orange with tether point to protect power drill at height
Battery Drill Holster in black and orange with tether point to protect power drill at height
Battery Drill Holster in black and orange with tether point to protect power drill at height

Battery Drill Holster

SKU: TH-BDRILL
WLL: 5 kg

£0.00

The Battery Drill Holster has a clever angled design, which uses a drill’s own weight to secure its top heavy mass.

SKU Type Quantity
TH-BDRILL-LF-R Right handed loop fastening
TH-BDRILL-LF-L Left handed loop fastening
TH-BDRILL-VF-L Left handed velcro fastening
TH-BDRILL-VF-R Right handed velcro fastening
SKU: TH-BDRILL Categories: ,

The Battery Drill Holster has a clever angled design, which uses a drill’s own weight to secure its top-heavy mass. An open bottom means it can be holstered with the drill bit in place, preventing damage and allowing quicker cool down. It also comes with 7 x external pockets to carry drill bits, a strap to secure the drill while climbing and a padded foam backing, making it more comfortable to hang from your belt.

• Open bottom
• Padded back panel
• 1 x tethering point

Volume: 3L / Height: 36cm / Width: 16cm / Weight: 200g
WLL 5kg

All-in-one safety.

All Leading Edge tool tethering products are tested and certified in accordance with EN364-1992 test methodology. It conforms to the provision and scope of our testing and quality procedures as per the PPE Regulations (EU)2016/045, where applicable and relevant within the fit for purpose design parameters.

Safety Factors.

All certified Leading Edge products boast a whopping 47x safety factor. We purposefully over engineer our products to have greater resilience than a real world scenario would require — this gives them superior in-service lifespan and fully 3guarantees your safety in daily use.

Testing Methods.

All tool safety equipment classified as UKCA approved must surpass two rigorous testing methods.

Static Test.

We attach the product to an anchor point and apply pressure by hanging a weight from it. A product only passes if it is able to withstand the load for a minimum of three minutes without signs of damage or weakening.

Dynamic Drop Test.

We attach the product to an anchor point and apply pressure by hanging a weight from it. A product only passes if it is able to withstand the load for a minimum of three minutes without signs of damage or weakening.

Every item that leaves our factory comes with full documentation containing technical specifications, serial numbers, testing methods, working load limits and inspection results proving it has passed all necessary requirements for work at height.