Pro MEWP Bag in black and orange designed to work safely at height
MEWP Bag in black and orange designed to work safely at height
MEWP Bag in black designed to work safely at height
MEWP Bag in black and orange designed to work safely at height

Pro MEWP Bag

SKU: TB-PRO-MEWP-D
WLL: 45 kg

£0.00

The advanced Pro MEWP Bag is designed to used as a permanent, dedicated MEWP work bag. Compared to the standard MEWP bag, it offers greater performance, higher WLL and zero deformation under heavy load.

SKU Size Quantity
TB-PRO-MEWP-D Single
SKU: TB-PRO-MEWP-D Categories: ,

The advanced Pro MEWP Bag is designed to be used as a permanent, dedicated MEWP work bag. Compared to the standard MEWP bag, it offers greater performance, higher WLL and zero deformation under heavy load. This is thanks to a rigid structurally reinforced opening that stops the front from sagging. A full velcro lid closure gives you additional security and protects bag contents in bad weather conditions.

• Structurally reinforced opening
• 5 x Large external pockets
• 2 x Internal dividers
• 11 x D-ring tethering points
• Full lid closure

Volume: 28L / Height: 37cm / Width: 45cm / Depth: 17cm / Weight: 1.55Kg

WLL 45kg

All-in-one safety.

All Leading Edge tool tethering products are tested and certified in accordance with EN364-1992 test methodology. It conforms to the provision and scope of our testing and quality procedures as per the PPE Regulations (EU)2016/045, where applicable and relevant within the fit for purpose design parameters.

Safety Factors.

All certified Leading Edge products boast a whopping 47x safety factor. We purposefully over engineer our products to have greater resilience than a real world scenario would require — this gives them superior in-service lifespan and fully 3guarantees your safety in daily use.

Testing Methods.

All tool safety equipment classified as UKCA approved must surpass two rigorous testing methods.

Static Test.

We attach the product to an anchor point and apply pressure by hanging a weight from it. A product only passes if it is able to withstand the load for a minimum of three minutes without signs of damage or weakening.

Dynamic Drop Test.

We attach the product to an anchor point and apply pressure by hanging a weight from it. A product only passes if it is able to withstand the load for a minimum of three minutes without signs of damage or weakening.

Every item that leaves our factory comes with full documentation containing technical specifications, serial numbers, testing methods, working load limits and inspection results proving it has passed all necessary requirements for work at height.