Technician’s tool Bag in black with large external pockets and tether points
Technician’s tool Bag in black with large external pockets and tether points
Technician’s tool Bag in black with large external pockets and tether points
Technician’s tool Bag in black with large external pockets and tether points
Technician’s tool Bag in black with large external pockets and tether points

Technician’s Bag

SKU: TB-TECH
WLL: 25 kg

£0.00

The Technician’s Bag was originally developed to meet the needs of overhead lines engineers. Its premium design is robust enough to endure years of daily use and features fully securing pockets and lid.

SKU Size Quantity
TB-TECH-LF-D N/A
TB-TECH-VF-D N/A
TB-TECH-LS-D N/A
SKU: TB-TECH Categories: ,

The Technician’s Bag was originally developed to meet the needs of overhead line engineers. Its premium design is robust enough to endure years of daily use and features fully secured pockets and a lid. This lets you manoeuvre freely at height without fear of loss. The depth and dimensions of the main pocket keep the opening from collapsing and the velcro lids fold neatly back on themselves to reduce obstruction.

• 2 x Large external pocket
• 4 x Tool frogs
• Secure pockets and lids
• 8 x D-ring tethering points

Volume: 12.5L / Height: 32cm / Width: 30cm / Depth: 11cm / Weight: 775G
WLL 25kg

All-in-one safety.

All Leading Edge tool tethering products are tested and certified in accordance with EN364-1992 test methodology. It conforms to the provision and scope of our testing and quality procedures as per the PPE Regulations (EU)2016/045, where applicable and relevant within the fit for purpose design parameters.

Safety Factors.

All certified Leading Edge products boast a whopping 47x safety factor. We purposefully over engineer our products to have greater resilience than a real world scenario would require — this gives them superior in-service lifespan and fully 3guarantees your safety in daily use.

Testing Methods.

All tool safety equipment classified as UKCA approved must surpass two rigorous testing methods.

Static Test.

We attach the product to an anchor point and apply pressure by hanging a weight from it. A product only passes if it is able to withstand the load for a minimum of three minutes without signs of damage or weakening.

Dynamic Drop Test.

We attach the product to an anchor point and apply pressure by hanging a weight from it. A product only passes if it is able to withstand the load for a minimum of three minutes without signs of damage or weakening.

Every item that leaves our factory comes with full documentation containing technical specifications, serial numbers, testing methods, working load limits and inspection results proving it has passed all necessary requirements for work at height.