Fall Arrest Jacket / Vest Harnesses / Tool Tethering Safety Vest in orange
Fall Arrest Jacket / Vest Harnesses / Tethering
Fall Arrest Jacket / Vest Harnesses / Tethering

Tether Jacket

SKU: UVEST
WLL: 30 kg

£0.00

The Tether Jacket is a secure and convenient way to carry hand tools at height on your body. Our one-size-fits-all design features front, side and shoulder adjustments, shoulder padding plus a back flap to enable a harness dorsal D-ring to pass through.

SKU Size Quantity
UVEST Single
SKU: UVEST Categories: ,

The Tether Jacket is a secure and convenient way to carry hand tools at height on your body. It is made from a comfortable, breathable structural mesh with multiple front pockets for easy tool holstering. The one-size-fits-all design features front, side and shoulder adjustments, shoulder padding and a back flap that allows your harness dorsal D-ring to pass through. It can be worn on its own or both under and over a harness. Additional belt loops also allow the jacket to be used in conjunction with Blade Belts to carry lanyards or tool bags.

• Side, shoulder and front adjustment straps
• Multiple pockets and tool holsters
• Belt loops
• Anchorage D-rings
• High-vis elements
• Padded shoulder

WLL 30kg

All-in-one safety.

All Leading Edge tool tethering products are tested and certified in accordance with EN364-1992 test methodology. It conforms to the provision and scope of our testing and quality procedures as per the PPE Regulations (EU)2016/045, where applicable and relevant within the fit for purpose design parameters.

Safety Factors.

All certified Leading Edge products boast a whopping 47x safety factor. We purposefully over engineer our products to have greater resilience than a real world scenario would require — this gives them superior in-service lifespan and fully 3guarantees your safety in daily use.

Testing Methods.

All tool safety equipment classified as UKCA approved must surpass two rigorous testing methods.

Static Test.

We attach the product to an anchor point and apply pressure by hanging a weight from it. A product only passes if it is able to withstand the load for a minimum of three minutes without signs of damage or weakening.

Dynamic Drop Test.

We attach the product to an anchor point and apply pressure by hanging a weight from it. A product only passes if it is able to withstand the load for a minimum of three minutes without signs of damage or weakening.

Every item that leaves our factory comes with full documentation containing technical specifications, serial numbers, testing methods, working load limits and inspection results proving it has passed all necessary requirements for work at height.